Description
TP-Link TL-AP300I-DC 300Mbps In Wall 86 Panel Wireless AP Router Wireless Wifi Access Point 9VDC/0.6A DC power supply in Wall AP For Hotel
Professional design for the hotel and home decoration products WiFi access point, to provide users with convenient WLAN service using standard 86 boxes, with the existing building structure, without consuming more time and cost, you can easily set up a wireless network complete
.
Note: This AP only had Chinese firmware
Main Features
1. 11N wireless technology, 300Mbps wireless speed
2. There are FIT mode and FAT mode,choose the mode according to the environment
3. As the 86 type panel,can installed directly to the 86 type network box
4. 9V DC / 0.6A adapter power supply,no extra PoE switches,low cost to set up a wireless network
5. One RJ45 and one RJ11 port on the back,easy to install
6. Support 8 SSID,can set different SSIDs with different network permission
7. Automatic channel selection, can adjust the power
8. Coverage the radius of 10 meters or 6 rooms in the hotel
More Details
300Mbps high-performance wireless, for mobile devices to provide adequate wireless bandwidth
With the mobile phone, tablet PCs, notebook computers and other mobile devices more and more access to wireless networks, the wireless network bandwidth demand is getting higher and higher. TL-AP300I-DC uses 802.11N wireless technology, wireless rates up to 300Mbps, to meet more equipment access, and for each device to provide higher wireless bandwidth. Support wireless channel automatic adjustment, to avoid interference with the same frequency, and can manually adjust the transmission power size, in order to achieve the best wireless coverage.
Specifications
Hardware specifications
Product number :TL-AP300I-DC thin section square
Installation method
: Install directly into the national standard 86 network junction box
Size
: 86 x 87.5 x 33mm
Wireless
Working frequency band: 2.4GHz-2.483GHz China
Wireless rate: 300Mbps
Port
Front: 2 10/100M RJ45 ports including 1 penetration port, 1 DC power socket port
Back: 2 10/100M RJ45 ports including 1 penetration port
Antenna
: Built-in antenna
Indicator light
: 1 system indicator
Button
1 WiFi/LED multiplexing button
1 FAT/FIT mode toggle switch
1 Reset button
Power supply : 9V DC/0.6A power adapter for power supply
Maximum power consumption of the whole machine
: 3.2W
Manage
FIT AP mode: unified management by TP-LINK wireless controller AC
FAT AP mode: independent web page management
Use environment
Working temperature: 0℃~40℃
Working humidity: 10~90RH non-condensing
Storage temperature: -40℃~70℃
Storage humidity: 5~90RH non-condensing
Software specifications FAT AP mode
Wireless function
SSID broadcast: support
Number of SSID: 4 support Chinese SSID
Network type: guest network, employee network
Wireless encryption: WPA, WPA2, WPA-PSK, WPA2-PSK
User isolation: isolation between wireless networks, isolation within APs
Wireless MAC address filtering: support whitelist 50
VLAN settings: support SSID and Tag VLAN binding
Transmit power setting: support 1dBm linear adjustment
WDS function: support
Limit on the number of wireless clients: support
QoS: WMM
Prohibition of weak signal equipment access: support
Eliminate weak signal equipment: support
Maximum number of clients that can be associated
: 16
System Management
Equipment management: all Chinese WEB management
System log: support
Restore factory settings: support
Backup configuration: support
Import configuration: support
Software upgrade: suppo
rt
Ping watchdog: support
Product Display
Reviews
There are no reviews yet.