Description

Order description

Lii-600 Full: Lii-600 charger + 12V/5A adapter + 12V Car Cable + manual

Order description

Lii-S8 Full: Lii-S8 charger + 12V/4A adapter + 12V Car Cable + manual

Specific parameters

Brand: LiitoKala Model: Lii-M4
Input voltage: DC 5V/2A
Output voltage:DC 4.2V / DC 1.48V / DC 3.65V / DC 4.35V / 5V
Output current Lithium battery
charging current: 500mA x 4 / 1000mA x 2 NiMH battery
charging current: 500mA x 4 USB 5V output current: 1000mA Rechargeable battery specifications: 26650,21700,18650,18350, 20650,14500, AA, AAA, C,SC etc. Termination method: intelligent voltage monitoring
Dimensions: 146mm length x 100mm width x 33mm height.
Order description

Lii-S6 Full: Lii-S6 charger + 12V/3A adapter + 12V Car Cable + manual

Lii-S6 6-slot Car Polarity Detect Charger
Auto Polarity Detect. x 12V / 3A input with a total power of 36 W. 6 slots work independently. It can be charged together with a variety of battery mixes. x Can accept 32700, 26650, 21700, 20700, Ni-MH SC and other large batteries x A variety of protection, charging safe.

Lii-500S Features

1. New touch control function;

2. Four optional charging currents: 500mA x 4/700mA x 4/1000mA x 4/2000mA x 2;
3. Two discharge currents: 250mA x 4/500mA x 4;

4. It can charge different batteries of different specifications 18650/26650……/AA/AAA;

5. This product uses a separate LCD display, charge and discharge mode MODE. Voltage V.

Current mA. Time h. Capacity mAh parameters, at a glance;

6. CHARGE, DISCHARGE and TEST modes can work simultaneously; independently set

charge/discharge capacity detection/normal capacity detection function;

7. A variety of protection functions: overcharge and over discharge, short circuit, temperature,

0V voltage activation function, 1.65V-2.2V non-charging function, intelligent identification

of bad battery and reverse battery detection protection;

8. With standard 5V/1000 mA USB output function only valid when AC power is connected;
Lii-500S Parameters
Input voltage:
DC 12V/3.0A
Output voltage:
DC 4.2V / DC 1.48V
Output current
Lithium battery charging current:
500mA x 4 /700mA x 4/1000mA x 4 2000mA x 2
NiMH battery charging current:
500mA x 4/700mA x 4 /1000mA x 4
Rechargeable battery specifications:

26650,21700,18650,18350, 20650,14500, AA, AAA, etc.
Discharge current:
250mA / 500mA
USB output:
5V—1000mA
Termination method:
intelligent voltage monitoring
Dimensions:

162mm length x 100mm width x 36mm height.
Order description

Lii-500S Full: Lii-500S charger + 12V/3A adapter + 12V Car Cable + manual

Note: The results of the Lii-500S charger test are for reference only and do not make any professional proof.
Dear customers:

Hello, the Liitokala Lii-PD4 charger does not have a test capacity feature. Please pay attention to the choice when purchasing. Thank you

Liitokala Lii-PD4 Chargerx1

AC Cable x1

Manual x1

Cautions:

1.

This charger can charge all cylindricalrechargeable batteries 3.7V Li-Ion, 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4

2.

Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

3.

If DC input, only 12V 1Ais recommended

4.
Mind heating while charging

5.

Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

6.
For indoor use only

7.

The displaying data only for reference, please refer to professional instrument for more accurate data

Specifications and functions:

1.

Multi-power input: AC cable 110-240V 50/60Hz included/ 12V 1A adapterselective, four independent charging and micro computer management system.

2.

Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA,2000mA is fixed only for slot#4.

3.

Multi-functional LCDcharging display: for charging progress25 – 50 – 75 -100 , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V IMR, charging capacity, voltage and current: 0.5A/1A/2A.

4.

Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteriesIMR

5.

Refresh for OV battery. It will not charge any battery of1.65 -2.20V refresh current can be detected only

6.

Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7.

Chargingat constant voltage and current

Button and LCD :

1.
Button of ModeChannel button
:

there are 4 independent buttons separately for each channel. While power supply is connected and battery inserted, 1 Short click the channel button in 5S to change the battery type. It will start to charge 5 seconds after setting the battery type 3.2V or 3.80V, 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries;

Note: Battery type can be only selective before charging starts.

2.

LCD: While power supply connected, the LCDwill light up for 3S: 1 If no battery is inserted, the LCD will display null and will be off in 30S 2 When battery is inserted and detected, the LCD will show channel number while the battery type image Li-Ion 3.7Vflashing indicating to set the battery type: this moment if short click the channel button, it can set battery type; if no operation in 5 seconds, it beginsby automatic detectionLi-Ion 3.7V or NIMH then charging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display100mean while it shows End on the LCD right down corner.

LCD displaygraphic reference
:

Cautions:

1.

This charger can charge all cylindricalrechargeable batteries 3.7V Li-Ion, 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4

2.

Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

3.

If DC input, only 12V 1Ais recommended

4.
Mind heating while charging

5.

Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

6.
For indoor use only

7.

The displaying data only for reference, please refer to professional instrument for more accurate data

Specifications and functions:

1.

Multi-power input: AC cable 110-240V 50/60Hz included/ 12V 1A adapterselective, four independent charging and micro computer management system.

2.

Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA,2000mA is fixed only for slot#4.

3.

Multi-functional LCDcharging display: for charging progress25 – 50 – 75 -100 , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V IMR, charging capacity, voltage and current: 0.5A/1A/2A.

4.

Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteriesIMR

5.

Refresh for OV battery. It will not charge any battery of1.65 -2.20V refresh current can be detected only

6.

Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7.

Chargingat constant voltage and current

Button and LCD :

1.
Button of ModeChannel button
:

there are 4 independent buttons separately for each channel. While power supply is connected and battery inserted, 1 Short click the channel button in 5S to change the battery type. It will start to charge 5 seconds after setting the battery type 3.2V or 3.80V, 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries;

Note: Battery type can be only selective before charging starts.

2.

LCD: While power supply connected, the LCDwill light up for 3S: 1 If no battery is inserted, the LCD will display null and will be off in 30S 2 When battery is inserted and detected, the LCD will show channel number while the battery type image Li-Ion 3.7Vflashing indicating to set the battery type: this moment if short click the channel button, it can set battery type; if no operation in 5 seconds, it beginsby automatic detectionLi-Ion 3.7V or NIMH then charging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display100mean while it shows End on the LCD right down corner.

LCD displaygraphic reference
:

Electrical Parameters:

1. Input : AC cable 110-240V 50/60Hz included/ DC 12V 1Aselective

2. Output voltage: DC 4.2V for Li-Ion 3.7V

DC 4.35V for Li-Ion 3.8V IMR

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,

1000mA x 2, 500mA x 3 500mA x 4

NiMH/NiCd: 1000mA x 2, 500mA x 3 500mA x 4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

133mm x 100mm x 35mm L x W x H

Weight: approx175g not including AC cable

Electrical Parameters:

1. Input : AC cable 110-240V 50/60Hz included/ DC 12V 1Aselective

2. Output voltage: DC 4.2V for Li-Ion 3.7V

DC 4.35V for Li-Ion 3.8V IMR

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,

1000mA x 2, 500mA x 3 500mA x 4

NiMH/NiCd: 1000mA x 2, 500mA x 3 500mA x 4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

133mm x 100mm x 35mm L x W x H

Weight: approx175g not including AC cable

Shipping list:

Lii-S2 Charger x 1

USB cable x 1

5V 2A plug x 1

Instruction manual x 1

Lii-402 List:

1, Liitokala Lii402 whole package: Lii402 charger + USB cable + 5V 2A charging plug + manual

Lii-202 List:

1, Liitokala Lii202 package: Lii202 charger x 1+ USB cable x 1 + 5V 2A charging plug x 1+ manual x 1

1. WORLDWIDE. Except some countries and APO / FPO

2. Orders processed timely after payment verification.

3. We only ship to confirmed order addresses. Your order address MUST CORRESPOND TO your Shipping address.

4. The pictures shown are not the actual item and are just for your reference.

5. TRANSFER TIME SERVICE is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.

6. If you have not received your shipment within the estimated days from the payment, please contact us. We will follow the dispatch and get backto you as soon as possible with a reply. Our goal is customer satisfaction!

7. Due to differences in status and stock of the time, we will choose to ship your item from our first available warehouse for fast delivery.

1. Limited warranty on defective items excluding items damaged and / or poorly upon receipt. Accessories come with a warranty.

2. Defective items MUST be reported and returned within the warranty period and in the original packaging if possible. You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.

You agree to all above-policy items listed after ordering on PORTAL!

1. All items MUST be returned in the original packaging and you MUST provide us with shipping tracking number, specific reason for return, and your order.

2. WE WILL RETURN YOUR FULL VALUE OF THE WINNER, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER Buyer and Seller cancel the PORTAL transaction. OR, you may choose to have a substitute.

3. We will bear all shipping costs if the product s is are not as advertised.