Description

Lii-500 Features

1,MCU smart controled / Charge selective up to 1000mA
2,Test the battery capacity
3, 5V USB output power bank
4,Short-circuited protection / Reverse protection
5,Over Chg&Dsg protection / Over heating protection
6,Time limitationNiMH / Defective cell protectio
Lii-500 Date

Order description
Lii-500 Charger:Lii-500 only charger
Lii-500 and adapter:Lii-500 charger + 12V/2A adapter + manual
Lii-500 Full Set: Lii-500 charger + 12V/2A adapter + 12V Car Cable + manual

Note: The results of the Lii-500S charger test are for reference only and do not make any professional proof.

Input: DC 12V / 2Amin.
Charge output: Li-Ion 4.2V 300mA/500mA/700mA/1000mA x 4
Ni-MH/Cd 1.48V 300mA/500mA/700mA/1000mA x 4
Charging cut-off voltage: lithium-ion battery 4.2 ± 0.05V
Discharge output: 500mA cutoff Li-Ion 2.8V/ NiMH 0.9V
USB output: 5V 1000mA only with Li-Ion 3.7V battery inserted
For battery sizes: diameter 8mm-26mm; height 34mm-71mm
NiMH/Cd AAA/Micro, AA/Mignon, C/ Bady, Sub- C, A
Li-Ion 26650, 22650, 18650,18490, 18500,
17500, 17355, 16340RCR123, 14500, 10440

Dimensions: L x W x H / 162 x 96 x 36mm

Weight: 441gIncluding box
Lii-PD4 Dete

1. Input : AC cable 110-240V 50/60Hz included/ DC 12V 1Aselective
2. Output voltage: DC 4.2V for Li-Ion 3.7V
DC 4.35V for Li-Ion 3.8V IMR
DC 3.65V for LiFePO4
DC 1.48V for NiMH/NI-Cd
3. Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,
1000mA x 2, 500mA x 3 500mA x 4
NiMH/NiCd: 1000mA x 2, 500mA x 3 500mA x 4
4. Constant voltage, cut-off current: less than 100mA
5. Standby current: less than 15mA
Compatible battery types and sizes
Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440
NiMH/Cd: AA, AAA,SC, C
Size and weight:
133mm x 100mm x 35mm L x W x H
Weight: approx175g not including AC cable
FAQ

What is the difference between Lii-500S and Lii-500?

There are 4 different places.
1, touch control.
2, high-definition LCD screen.
3, increased 2000mA charging current.
4, USB output is DC buck output, not power bank.
Cautions:

This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO
4

Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

If DC input, only 12V 1A is recommended

Mind heating while charging

Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

For indoor use only

The displaying data only for reference, please refer to professional instrument for more accurate data

Specifications and functions:

1. Multi-power input: AC cable 110-240V 50/60Hz included/ 12V 1A adapterselective, four independent charging and micro computer management system.

2. Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA,2000mA is fixed only for slot#4.

3. Multi-functional LED charging indicators: for charging progress: 25 – 50 – 75 -100 , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V IMR and for charging current: 0.5A/1A/2A

4. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteriesIMR

5. Refresh for OV battery. It will not charge any battery of1.65 -2.20V refresh current can be detected only

6. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7. Charging at constant voltage and current

Button and LED :

1. Button of Mode: While power supply is connected, 1 Short click the mode button to change the battery type. It will start to charge 5 seconds after setting the battery type 3.2V or 3.80V, 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries; 2 During charging process, short click the mode button to display battery type.

Note: Battery type can be only selective before charging starts.

2. LED: While power supply connected, all LEDS light up immediately 1 If no battery is inserted, the 500mAh LED one of the three current display LEDS will keep on and others will be off. 2 When battery is inserted and detected, 4 LED charging indicator for the channel will be on among which 3.7V battery type LED keeps flashing indicating to set the battery type, if no operation in 5 seconds, it begins by automatic detectionLi-Ion 3.7V or NIMH then four LED indicators will display the charging status. 3 During charging, short click the Mode button to show the battery type within 5 seconds; 4 If no power supply is connected, inserting a battery, it can quick shows the remaining charger volume of the battery.

x LED display graphic reference:

Electrical Parameters:

1. Input : AC cable 110-240V 50/60Hz included/ DC 12V 1Aselective;

2. Output voltage: DC 4.2V for Li-Ion 3.70V

DC 4.35V for Li-Ion 3.85V IMR

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA x 1only for slot#4,

1000mA x 2/500mA x 2

NiMH/NiCd: 500mA

4. Constant voltage, cut-off current: less than 100mA;

5. Standby current: less than 15mA.

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340RCR123, 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

133mm x 100mm x 35mm L x W x H

Weight: approx175g

Lii-402 List:

1, Liitokala Lii402 whole package: Lii402 charger + USB cable + 5V 2A charging plug + manual
Lii-402 Charger Manual
Fourth, the electrical technical parameters:
1, input power: Micro USB DC 5V / 2A
2, the output voltage: 1.42V
4.2V ± 0.05V,
3.65 ± 0.05V
4.35 ± 0.05V

3, the output current: 2000mA x 1 1000mA x 2 700mA x 3 500mA x 4

4, constant voltage charging, cut-off current: <100m A;

5, external power supply standby current: <15.0m A;
Five, USB output function:

1, USB port output no-load voltage: 4.90-5.30V; specify the fourth slot for the USB output
2, the output current: 1000 m A;
3, no-load current: <1m A;

4, load 1000m A current, the port output voltage: 4.75-5.25V;
5, stop output protection voltage: 3.0 ± 0.1V;

6, compatible batteries: Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 RCR123, 14500, 10440

Seven, charger size: 112mm × 90mm × 30mm length / width / height
Weight: 173g + micro line
Lii-202 List:

Input: Micro USB DC 5V / 2A
Output: 1.4, 4.2V ± 05, 3.65 ± 05, 4.35 ± 05
Output Current: 500/1000 mAh

constant voltage charging cut-off current: <100 mAh
Standby Current: <15 mAh
5. USB output function
USB output load voltage: 4.90 V-5.30
Output Current: 1000 mAh 1A
Idle Current: <1 mAh

the output voltage of 4.75 V-5.25 V, when the current 1000 mAh
output over-voltage protection: 3.0 ± 1
6. Compatibility

li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 RCR123, 14500, 10440
7. Size
112 mm × 60 mm × 30 mm / 86 g + 15 g USB cable

Thank you for coming, I wish you a happy shopping!