Description
The products we sell:
Custom-made electromagnetic radiation protective hooded overcoatsincluding 4 customized solutions
Customized program:
Option 1MTF:
Metal fiber single layer radiation protective hooded overcoat
Specific composition of fabric: 41.8 cotton, 32.1 polyester fiber,
26.1 metal fiber
Frequency range: 30MHz-18GHz
Shielding effectiveness: 12.2dB-49.4dB
Metal fabric analysis:
The outer layer of metal fiber for this radiation protection suit has been in the market for a long time. The product technology is mature. The stainless steel fiber with ion precision quenching technology is blended with cotton fiber and polyester fiber. It is resistant to washing, good air permeability and good radiation protection effect.
Recommended use environment:
Metal fiber fabric is recommended for daily office, high-speed rail, small monitoring room, power plant, substation and so on.
NOTE:
The thickness of the metal fiber fabric is similar to that of the common work clothes fabric, and it can be used to make clothes directly. Therefore, our metal fiber fabric work clothes are single layer.
The maintenance method of metal fiber:
Metal fibers are tough, and folding in a short time will not damage, but long-term folding and extrusion will produce metal fatigue and affect the metal structure. It is recommended to hang store metal fiber clothes.
1. Can be directly washed, ordinary neutral detergent and detergent can be;
2. Hand wash, can be brushed with soft brush, avoid rubbing and machine washing;
3. After washing, you can't wring it, remove it directly from the water, and keep it cool;
4. You can't bleach your clothes with bleach, or wash your clothes with a detergent that contains bleach;
5. If the clothes appear pleated, the medium temperature irons, the temperature is not more than 110 degrees Celsius;
6. It is recommended not wash as much as possible in case of improper washing.
Option 250Ag:
50 Silver fiber double-layer radiation protective overcoat
Outer fabric: tooling polyester cotton; Specific composition of inner fabric: 50.6 polyester fiber,
49.4 silver fiber
Frequency range: 30MHz-18GHz
Shielding effectiveness: 33.8dB-51.3dB
Option 375Ag:
75 Silver fiber double-layer radiation protective overcoat
Outer fabric: tooling polyester cotton; Specific composition of inner fabric: 25.2 polyester fiber,
74.8 silver fiber
Frequency range: 300MHz-18GHz
Shielding effectiveness: 53.3dB-59.2dB
Option 4100Ag:
100 Silver fiber double-layer radiation protective overcoat
Outer fabric: tooling polyester cotton; Specific composition of inner fabric:
100 silver fiber
Frequency range: 9KHz-40GHz
Shielding effectiveness: 45.0dB-68.6dB
Silver fabric analysis:
The silver fiber radiation protection suit is a high-tech product obtained by permanently bonding silver to a fiber surface through a special technique. This structure not only makes the silver fiber maintain the original textile property, but also gives it all the The magical function of silver, the magical effect of silver fiber. Silver has the most effective antimicrobial properties. Silver fiber radiation-proof fabric made of silver-containing fiber using nanotechnology is the latest radiation-proof technology in the world after metal anti-radiation fiber cloth. It has the functions of radiation protection, anti-bacterial and anti-fouling, and is the production of radiation-proof clothing. Ideal fabric. Its anti-radiation effect is superior to radiation-proof fabric made of other metal materials, which can be worn close to the body and beneficial to the human body.
Recommended use environment:
Silver fiber anti-electromagnetic radiation fabric is recommended for various military radar stations, electronic countermeasure, wireless communication base stations, civil aviation, meteorology, public security, high-speed, intelligent building monitoring rooms, electromagnetic compatibility laboratory, 5G communication, new energy vehicles , Overhaul of railway communication, etc.
NOTE:
1. The silver fiber anti-electromagnetic radiation fabric is monotonous and relatively thin. It is not suitable for making clothing directly. It is usually used as the lining of the clothing. The outer layer is determined according to customer needs. Therefore, our silver fiber anti-electromagnetic radiation work clothes are double layers, and the outer layer is polyester-cotton fabric by default.
2. Silver fiber anti-electromagnetic radiation fabrics exhibit excellent shielding performance under high-frequency electromagnetic radiation environments. The greater the shielding effectiveness value at a certain frequency point or frequency band, the better the protection effect, which is usually 30dB equivalent to a shielding rate of 99.9 The above is a very good effect.
The maintenance method of silver fiber:
Silver fiber exposed to the air can not avoid oxidation, the fabric will be black or yellow, is a normal phenomenon, does not affect the shielding effect. To reduce the oxidation of washing, it is recommended to wear a shirt inside, if do not use, it is recommended sealed.
1. It is recommended to wash with well water, mineral water, pure water; Reason: Some tap water contains chloride ion, and if the chloride ion is excessive, it is easy to react with silver to reduce the damage to silver by alkali and chlorine
2. Modest amount of neutral detergent, washing for a short time; Do not use acidic detergent or laundry detergent
3.
Can't rub and washing machine wash. Can't be bleached, after clothes washed, can't wring it, pick up directly from the water and hang it in a ventilated and dry room, avoid exposure, do not recommend ironing.
4. It is recommended to wash or wash as little as possible to prevent improper washing effect of shielding.
NOTE: Cell phone signal does not equal cell phone radiation
The mobile phone signal is a high-frequency microwave signal. It is the ability of the mobile phone itself to receive signals. It is basically harmless to the human body. The mobile phone signal has spread all over the world and is also supported by the countries of the world. The mobile phone can automatically search for signals. The steel in high-rise buildings is all steel. The elevator can receive signals, so the mobile phone initiative to search for signals has its own particularity. The protective effect of radiation protection suits cannot be based on the strength of mobile phone signals.
My anti-radiation hooded overcoats are protected against electromagnetic waves generated by the sudden increase or decay of electric currents in electronic components, and are not anti-cell-phone signals.
Fabric test methods:
1.Fabric combustion method:
The residue after the cloth is fully burned is network metal, These metal meshes are used to shield electromagnetic radiation, so it can be proved that the cloth can effectively shield electromagnetic radiation.
This method is only suitable for metal fiber fabric
2.Speaker noise interference method:
Turn on the audio equipment, the phone next to the audio equipment, so that another person to call the phone, this time you can usually hear the sound of si si noise. The reason is that when the phone calls will emit electromagnetic radiation to interfere with the normal operation of the audio equipment, and then cover the speaker with a protective clothing completely, then dial this phone, the sound of si si voice to eliminate or weaken. This test can prove radiation protection clothing to the shielding effect.
3.Conductivity test method:
Radiation protection fabrics and ordinary fabrics are essentially different. Since metal fiber and silver fiber can conduct electricity, radiation protection fabrics are electrically conductive, while ordinary fabrics aren't electrically conductive. When the multimeter pen is in contact with the test fabric and the distance is 10cm, The multimeter shows the resistance value, indicating that the fabric has conductivity, so it has anti-radiation effect.
4.Professional radiation equipment test method:
The first step: Use the electromagnetic radiation detector to detect the radiation of the computer screen, and the corresponding radiation value will be displayed.
The second step: Completely cover the computer screen with electromagnetic radiation protective clothing and then use an electromagnetic radiation detector to detect the radiation of the computer host, the radiation value will decrease or become zero.
Size information
Men’s hooded overcoat size chart unit: cm
Size
M
L
XL
XXL
XXXL
XXXXL
Clothes length
90
93
96
99
102
105
Chest circumference
114
116
118
120
122
124
Shoulder width
45
46
47
48
49
50
Sleeve length
59
60
61
62
63
64
Sample try on reference
Size
M
L
XL
XXL
XXXL
XXXXL
Heightcm
165
170
175
180
185
190
Weightkg
52.5-60
60-67.5
67.5-75
75-82.5
82.5-90
90-97.5
Women’s hooded overcoat size chart unit: cm
Size
M
L
XL
XXL
XXXL
XXXXL
Clothes length
86
88
90
92
94
Chest circumference
102
106
110
114
118
Shoulder width
39
40
41
42
43
Sleeve length
56
57
58
59
60
Sample try on reference
Size
M
L
XL
XXL
XXXL
XXXXL
Heightcm
155
160
165
170
175
Weightkg
42.5-50
50-55
55-60
60-67.5
67.5-75
Size description unit: cm x
Pure manual measurement, there may be an error of 1-2cm, which is
normal, please understand!
Reviews
There are no reviews yet.