40.80 $
15507 in stock
| Current | Electric Toy |
|---|---|
| Certification | ROHS |
| Voltage | 3.0 - 3.6V |
| Model Number | XY Joystick Module |
| Brand Name | SAMIORE ROBOT |
| Origin | Mainland China |
| Item Type | BALL |
| For Arduino STM | electronic module |
| Package | For Arduino STM |
| Operating Temperature | - 40 - +85 |
| Dissipation Power | DIY |
| is_customized | Yes |
| Condition | New |
| Type | Voltage Regulator |
| Type2 | Module |
| Package2 | SMD |
| Application | The experimental modules |
Two-axis key joystick sensor module by the use of PS2 rocker potentiometer, with X, Y 2-axis analog output, Z 1 button digital output. With the Ard uino sensor expansion board can produce remote control and other interactive works. In addition, this product in order to allow customers to more easily with the ard uino expansion board and other standard interfaces, in the design of the X, Y, Z axis of the circuit are separate leads, the user can use 3-pin ARD UINO special line really plug into the expansion board . Product performance: 1. Input voltage range: DC 3.3V to 5V
2. Output signal: the module special two-way analog output and a digital output interface, the output value corresponding to X, Y biaxial offset, the type of analog; keys that the user press the Z axis, Its type is digital switch.
3. Ard uino controller can be programmed, the sensor expansion board plug, complete with creative remote interactive works.
4. Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the tap resistance with the change. This module uses 5V power supply, the original state of X, Y read voltage of 2.5V or so, when pressed with the arrow direction, the read voltage value increases with the maximum to 5V; arrows in the opposite direction to press, read the voltage decreases , The minimum is 0V. Tutorial:
In the introduction of how to use, we first look at how it works, which we use it very helpful, there is a function of the following diagram: aeProduct.getSubject
In fact, this module is a potentiometer, x, y-dimensional data output port is read out the analog voltage. This figure does not draw the above z-dimensional data output, z-dimensional output only 0 and 1, can be achieved by a button. All in all, it is a combination of potentiometer and button. In the Ard uino use it, x, y dimension we received two analog ports to read their values, while the z-dimensional we are connected to the digital port, connected to the power and ground. test program: Int JoyStick_X = 0; // x Int JoyStick_Y = 1; // y Int JoyStick_Z = 3; // key Void setup {pinMode JoyStick_X, INPUT; PinMode JoyStick_Y, INPUT; PinMode JoyStick_Z, INPUT; Serial.begin 9600; // 9600 bps}
Y = analogRead JoyStick_Y; z = digitalRead JoyStick_Z; void loop {int x, y, z; Serial.print x, DEC; Serial.print ,; Serial.print y, DEC; Serial.print ,; Serial.println z, DEC;
10-1000Pcs LED COB Lamp Chip 1W 3W 3.2-3.6V Input 100-220LM Mini LED Bulb Diode SMD For DIY LED Floodlight Specifications: 1 Shapes :. Round 2 Emitting color: White / Warm white / Cool white, etc. 3 Lens colors :. Water clear, color diffused 4 Life Span :. 100,000 Hours 5 With RoHS & CE Approved 6 Beam angle :. 120 degrees 7. Luminous Flux: 100-120LM 8. color-rendering index: 60-80 Features: High-power LED 3W maximum junction temperature of 200 high brightness, low thermal resistance, in accordance with RoHS high temperature 70, 70, it can be a continuous trouble-free work 5000Hrs. High-power [...]
40.60 $ Add to cart
Features: OOTDTY Easy to install.Lighting without delay.Green environmental light source, comfortable and convenient.Eight imported high-quality LED lamp beads are used, which have low power, high brightness, environmental and energy conservation.The model is the same as that of the original vehicle. During installation, it does not need to replace any line, but directly replace the old lamp or install it in any preferred position, which is suitable for all truck Material: Rubber, PCDiameter: Approx. Approx. 5cm/1.97inLED Number: 21LEDsVoltage: DC12VPower: 3.6WService life: More than 50000 hoursWaterproof grade: IP67Color: Red/YellowPackage Includes: 2x Side MarkerNote: Please allow 1-2cm errors [...]
49.40 $ Add to cart
Features: OOTDTY Easy to install.Lighting without delay.Green environmental light source, comfortable and convenient.Eight imported high-quality LED lamp beads are used, which have low power, high brightness, environmental and energy conservation.The model is the same as that of the original vehicle. During installation, it does not need to replace any line, but directly replace the old lamp or install it in any preferred position, which is suitable for all truck Material: Rubber, PCDiameter: Approx. Approx. 5cm/1.97inLED Number: 21LEDsVoltage: DC12VPower: 3.6WService life: More than 50000 hoursWaterproof grade: IP67Color: Red/YellowPackage Includes: 2x Side MarkerNote: Please allow 1-2cm errors [...]
49.93 $ Add to cart
Features: OOTDTY Easy to install.Lighting without delay.Green environmental light source, comfortable and convenient.Eight imported high-quality LED lamp beads are used, which have low power, high brightness, environmental and energy conservation.The model is the same as that of the original vehicle. During installation, it does not need to replace any line, but directly replace the old lamp or install it in any preferred position, which is suitable for all truck Material: PlasticsCurrent: 0.12AVoltage: DC12V 30VApplicable for 12V / 30V car, trailers, trucks, etc.Size: Approx. Includes: 4x Side Marker4x ScrewsNote: Please allow 1-2cm errors due to [...]
55.59 $ Add to cart
Features: OOTDTY The package comes with a total of 5 pieces of LED trailer marker lights for trucks.These trailer marker lights are suitable as LED marker lamps, car side lamps, trailer lamps for many kinds of car, such as trucks, trailers, etc.Our trailer lights are designed with totally enclosed circuit, waterproof and can keep away from dirt.Made of quality LED and plastic-, reliable, not easy to deform and break, and can keep for a long time-.The surfaces of these lights are smooth and comfortable to touch-, do not need to worry about scratching your Material: rubber+pc Diameter: [...]
56.30 $ Add to cart
497 LED Side Marker Lights Front Rear Side Indicator Lights Turn Signal Lights IP67 Waterproof for Truck Trailer Lorry Bus XXFF Features: The package comes with a total of 5 pieces of LED trailer marker lights for trucks. These trailer marker lights are suitable as LED marker lamps, car side lamps, trailer lamps for many kinds of car, such as trucks, trailers, etc. Our trailer lights are designed with totally enclosed circuit, waterproof and can keep away from dirt. Made of quality LED and plastic-, reliable, not easy to deform and break, and can keep for a long [...]
57.65 $ Add to cart
Features: Ultrabright LED lighting, adopt big and stable chip, durable for a long time use. Magnetic base, easy installation, just put it on taxis roof top. No delay in lighting, much safer, prevent the rear-end collision danger. Its a great indicator light for taxies, waterproof and sun-proof design. Fit all of vehicle with 12V working voltage. Specifications: Name: Taxi Roof Top Sign Light Material: ABS Color: Yellow, White Voltage: DC 12V Rated Power: 3W Current:10A Cable Length: About 27cm Size: About 28x13x10cmLxWxH Package Included: 1 x Taxi Roof Light Note: 1. Due to the light and screen difference, [...]
60.23 $ Add to cart
Product Description LED RGB Truck Bed Rear Light Kit-Sound Activated Wireless Remote Multi-color Work Glow Neon Rock Lighting 8 Pods Update Design: RGB truck bed rail lights can provide you a awesome rock driving, 48pcs SMD5050 RGB LEDs can fit your all demands of color change. Remote Control: A wireless remote control to turn on/off and change colors as well as a rocker switch to hardwire if you want to shut power on/off from inside the truck. Easy to Install: Each truck bed light strip includes about 23.6inch of wire between each pod. The reliable 3M [...]
71.21 $ Add to cart
. Features: 100 Brand New. Size: 5.2 x 2.65 x 1.4cm L x W x H Module Properties: non-isolated constant current and voltage module Rectification: non-synchronous rectification Input voltage: 8V-34V Output voltage: 1.25V-32V Output current: adjustable maximum 5A Conversion efficiency: 95 the highest Switching frequency: 180KHz Output ripple: 50mV max 20M bandwidth Load Regulation: ± 0.5 Voltage Regulation: ± 2.5 Operating Temperature: -40 °c to +85 °c [...]
40.43 $ Add to cart
10w high power led chipColor temperature:warm white 2800-3500K white 6000-6500KLuminous flux: 90-110lm/wForward voltage: 9-12VIntegrated scheme: 3 in series, 3 in parallel20w 30w 50w 100w high power led chipColor temperature: warm white 2800-3500K white 6000k-6500KLuminous flux: 90-110lm/wFoward current: 20w 600mA 30w 900mA 50w 1500mA 100w 3000mADriver voltage: 30-36VAttention:It must need a heat sink aluminum for cooling, do not light it without heat sink aluminum. [...]
40.61 $ Add to cart| Chcę coś kupić ale szukam informacji jak zamówić... |
| Kupiłem coś ale chcę poznać status zamówienia... |
| Odebrałem paczkę ale mam pytanie lub problem... |
| Chcę dokonać zwrotu i potrzebuję informacji... |
| Droptech Sp. z o.o. droptech.polska@gmail.com |
| ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
| NIP: 7712911090 REGON 386758083 |
| Wysyłka bezpośrednio od producenta lub dostawcy |
| DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
| CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.