Additional information
Power | 120W |
---|---|
Voltage | DC5 - 12.0V |
Model Number | Heating Board |
Origin | Mainland China |
Certification | CE |
43.08 $
2585 in stock
Power | 120W |
---|---|
Voltage | DC5 - 12.0V |
Model Number | Heating Board |
Origin | Mainland China |
Certification | CE |
This product is a non-tapped mini ZVS finished-board, induction heating, excluding cooling fan. The maximum power is 120W 12.0V induction heating. Push the transformer 12.0V, the primary 10 turns, about 30W. DC5V-12.0V input voltage, this voltage-ranges is working voltage, not the no load voltage of power supplys. The voltage exceeds 12.0V or below 5V, we do not guarantee that it can work normally. Equipped with blue LED indicator light, if the indicator light is weak, means the power supplys is insufficient and you need to replace it with a higher power supplys.
Features:
This is a non-tapped mini ZVS finished-board, induction heating, tesla and Jacob's Ladder driver, cooling fan is not included.
The maximum power is 120W 12.0V induction heating. Push the transformer 12.0V, the primary of 10 turns, about 30W.
DC5V-12.0V input voltage, this voltage-ranges is working voltage, not the no load voltage of power supplys. The voltage exceeds 12.0V or below 5V, it is not guaranteed to work properly.
Make sure that all component parts are soldered correctly, the positive and negative poles of the power cord are not reversely connected, the load is connected, and then power on; do not power on at no-load which makes it easily broken.
The width of the object to be heated should be between 1/3~1/2 of the inner diameter of the heating coil, and the width should not exceed 2/3.
The diameter of the heating object should be controlled within 20mm as much as possible, if the heating object is too large, it will be difficult to heat it into red-hot, due to the limited power.
The current is relatively large during induction heating, the coil heat is also relatively large, usually work for 5 minutes to power off to cooling and please solder the heating coil directly to the printed circuit board during induction heating.
Equipped with blue LED indicator light, if the indicator light is weak, means the power supplys is insufficient and you need to replace it with a higher power supplys. Possible reasons for the indicator light not being on are:
1. the line is not connected properly and the power supply is not energized.
2. there are components on the board that are damaged.
Specifications:
Name: Induction Heating Board
Input voltage: DC5-12.0V
Maximum Power:150W12.0V Inductive Heating
Item size: 55 x 38 x 1.6mm / 2.17 x 1.50 x 0.06in
Package size: 80 x 80 x 30mm / 3.15 x 3.15 x 1.18in
Package weight: 50g / 1.76ounce
Packing List:
1 x Module
1 x Coil
Shipping:
1.We guarantee to ship goods out within 24-72 hour after payment confirmation except holiday.
2.We ship by China post,HKpost EMS,DHL,Fedex,according to your choice when placing orders .
3.If you didnt receive the item after 45 days,please feel free to contact us.We will make all our effort to resolve the problem.
4.We are not responsible for delays causedby the customs,Import duties,taxes or other customscharges.
Warranty:
1.All items have 1 year guarantee.IF your purchase do not meet merchantable quality, fitness for purpose or match the description, We can make sure your issues are resolved .
2.For wrongly-shipped items, Please contact us in 48 hours after delivery.We will arrange to deliver the correct items or return all your payment.
3.For defective or faulty products,please take photos or videos,we would resend or refund after confirmation.
Features: ZVS induction heating board kit can be used by DIY players for hardening, annealing and other heat treatments of small parts.It can be used with graphite crucible not included to smelt gold, silver, copper, aluminum and other metals, heating quickly and evenly.High-quality PCB board heating module, with nice durability, stable performance, wear-resistant and circuit adopts 12-48V low-voltage direct current power supplys, maximum current 20A, maximum power 1000W.The higher the voltage, the greater the heating current, the effect is better and the heat is greater, choose the right voltage according to the actual Material: PCB + MetalWorking Voltage: [...]
72.10 $ Add to cartProduct Description Knife & Tools Making Gas Forge Quick Heat & Good Thermal Insulation & Easy Operation Make blacksmithing fun again. Most of you have a long list of projects you want to complete, so we engineered this blacksmithing forge with the features DIY enthusiast talk about. Powerful firing capability will not disappoint you, and a complete kit of assisting parts allows you to have an excellent tour in the DIY forging world. Striking Power Output Large Capacity Balance Right Temperature Blacksmithing Forge Kit Steps for Usage Tough Equipment & Tools, Pay Less VEVOR is a leading brand that specializes [...]
213.11 $ Add to carthigh quality 240x60mm 600W Infrared bottom ceramic heating plate for BGA rework station Introduction Power: 600W 220/230V 450W 110/130V ceramic plate size: 240 x 60mm Suitable BGA rework station soldering machine Packing include: 1pcs x 240x60mm 600W Infrared ceramic heating plate(220V) 2pcs x 240x60mm 600W Infrared ceramic heating plate(220V) 4pcs x 240x60mm 600W Infrared ceramic heating plate(220V) 4pcs x 240x60mm 450W Infrared ceramic heating plate(110V) We will send according [...]
57.16 $ Add to cartjewelry melter High-temperature Small Melting Furnaces With 1kg 2kg 3kg graphite crucible small melting furnace Jewelry Casting Equipment Jewelry Tools 1500W 220/110V Jewelry tools, jewelry equipmentHigh quality, low priceWarranty 1 yearEasy to operateDescription1. 2 kg gold furnace: Vertical furnace is specially designed and manufactured to melt metal to cast and alloy metal up to 1100℃.2. 2 minutes gold coins take 40 minutes.3. Dimensions: 20 x 20 x 40mm,4. Weight: 9kg,5. Voltage: 220V/110V, 50 / 60HZ.Feature:1. High-purity fiber alumina chamber for energy saving - chamber size: 60 mm diameter. x 150 mm deep.2. Precise temperature control, easy-to-read digital display and LED [...]
415.15 $ Add to cartFeatures: - PTC ceramic element, quickly and easily heating, keeping you warm in the cold winter. - Built-in timer function1-12 hours, perfect for preheating the rooms. - Support 15℃~32℃ temperature setting. - Automatically power off when reaching the temperature set to avoid accidents, safe and reliable. - With 2 speeds, easy to adjust it based on your actual needs. - Comes with a remote control for conveniently controlling. - Easy to use, suitable for using at home or in the office. Specifications: Material: Plastic Plug: EU, US, UK Optional Power: 500W Temperature Setting: 15℃~32℃ Note: Please [...]
58.59 $ Add to cartmodname=ckeditor Option 1:Bare board Option 2:circuit board parts without copper pipes, fans, etc. Option 3: circuit board parts + copper tube Option 4: circuit board parts + copper tube shell fan full set This induction heating circuit uses a 12-55V low-voltage DC power supply, with a maximum input current of 50A and a maximum power of 3000W.It can be used for DIY players to do quenching, annealing and other heat treatments for small parts, andit can also be used with graphite crucibles to smelt gold, silver, copper, aluminum, lead, tin and other metals.This circuit can directly heat iron, carbon [...]
61.66 $ Add to cartFeatures: ZVS induction heating board kit can be used by DIY players for hardening, annealing and other heat treatments of small parts.It can be used with graphite crucible not included to smelt gold, silver, copper, aluminum and other metals, heating quickly and evenly.High-quality PCB board heating module, with nice durability, stable performance, wear-resistant and circuit adopts 24-36V low-voltage direct current power supplys, maximum current 20A, maximum power 1000W.The higher the voltage, the greater the heating current, the effect is better and the heat is greater, choose the right voltage according to the actual situation.Induction heating, high power, with [...]
58.73 $ Add to cartProduct Description High Frequency Induction Heater Furnace The high-frequency 15 kW induction heater uses advanced technology, simple and easy to operate, high efficiency, low energy consumption, high output power. It selects a power source based on power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the heat permeability. Widely used in brazing, silver welding, hot forging, melting, quenching, etc. Advanced Technology Heating Quickly Automatic Control Safety Protection Tough Equipment & Tools, Pay Less VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, [...]
1,061.71 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.