2KW 3KW Massage Bathtub Heater SPA Thermostat Circulating Heating for Hot and Cold Tubs Bathtub SPA Water Heater Equipment
Feature:
1. Widely used in the circulation system of hot springs and hot tubs with pressure to keep and heat the water temperature.
2. Cold water can also be heated, mainly for heating and thermostatic functions, install heater in the position of the bottom level.
3. This thermostat has the characteristics of excellent performance, complete functions, practicality and easy operation.
4. The water heater will start to work after the bathtub is filled with water. It is specially designed for hot and cold bathtubs and suitable for bathtub SPA.
5. Our water massage equipment heater does not require any special maintenance or programming and is easy to use.
Specification:
Item Type: Bathtub Heater
Material: Stainless Steel
Color: As shown in the picture
Product Size: Approx. 30×13.5×5.5cm / 11.8×5.3×2.2in
Purpose: Constant temperature heating
Heater Type: Water heater
Applicable Places: Massage bathtub, bathtub SPA.
Installation Method:
1. The bathtub water heater should be connected to the tubing circulation system, and can also be connected to the inlet and outlet of the bathtub pump to ensure that the direction of water flow conforms to the instructions on the bathtub water heater.
1. The heater must be installed horizontally.
2. The heater can be installed with the inlet or outlet of the bathtub pump. Note: Cannot be fixed by binding
3. PVC pipe: cut a specific length of polyethylene from the pump outlet and connect to the nozzle. Note: The size of the pipe joint should be the same as that of the bathtub pipe
4. Pipe joints: clean the PVC pipe joints, and then use glue to connect the PVC pipe and joints together. Note: installation distance between heater and pump
5. Heater installation: Separate the connecting nut and connect the PVC pipe to the heater Note: O-ring. Make sure the connection is tight enough. Note: The connecting nut is made of plastic material, too much force will cause damage.
6. Connect the knob to the thermostat heater at the threaded diameter of the fitting, then apply glue to the inside of the fitting connector without thread, and then insert the pipe to be connected in addition, the outer wall of the pipe is also coated with glue, so that it is more firm.
7. After the bathtub heater is installed, it must be checked:
●If the pipe or connection is leaking: Pour water into the bathtub and run the pump for 30 minutes to ensure that the circulating water system does not leak.
●If the heater does not start, try to find the problem in the most common faults and possible solutions provided.
Package List:
1 x Bathtub Heater 1 x English Manual 2 x 1# Pipe Connector 2 x 2# Pipe Connector 2 x Gasket
Note:
1. In order to avoid damage caused by inadvertently resetting the thermal circuit breaker, it must not be powered by external switching devices such as timers or connected to a circuit that regularly switch on and off by utilities.
2. The two gaskets are universally used for 4 connectors. When using the thermostat, connect two of the connectors according to your own pipe size requirements and install the gaskets, and then turn the knob to both ends of the thermostat.
1 We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
2 Payment must be made within 3 days of order.
3
If you cant checkout immediately after auction close, please wait for a
few minutes and retry Payments must be completed within 3 days.
About shipping
1. WORLDWIDE SHIPPING. Except some countries and APO/FPO
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes
weekends and holidays. Transit times may vary, particularly during the
holiday season.
6. If you have
not received your shipment within the period, please contact us. We
will track the shipment and get back to you as soon as possible with a
reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship
your item from our first available warehouse for fast delivery.
8. We seller are not in charge of import duty, buyer is responsible for that. Any dispute caused by this is unreasonable.
9. BR buyer please provide the cpf or cnpj, it will be better for you to get it more quickly. thanks
Return and Refund
1.
You have 7 days to contact us and 30 days to return it from the date it
was received. If this item is in your possession more than 7 days, it
is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT.
There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer
in half.
2. All returned items
MUST BE in the original packaging and you MUST PROVIDE us with the
shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the
item in its original condition and packaging with all components and
accessories included, AFTER BOTH Buyer and Seller cancel the transaction
from PORTAL. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the products is are not as advertised.
About feedback
We
maintain high standards of excellence and strive for 100 customer
satisfaction! Feedback is very important We request that you contact us
immediately BEFORE you give us neutral or negative feedback, so that we
can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!
Reviews
There are no reviews yet.
Be the first to review “2KW 3KW Massage Bathtub Heater SPA Thermostat Circulating Heating for Hot and Cold Tubs Bathtub SPA Water Heater Equipment” Cancel reply
HT601A Portable LED Combustible Flammable Gas Detector Gas Leakage Tester Analyzer Air Pressure Sensor Natural Gas Detector
HT601A Portable LED Combustible Flammable Gas Detector Gas Leakage Tester Analyzer
Feature:
1. 40cm/15.7in long flexible probe helps you reaching more area.
2. LED analog bar display, the detecting results are clear and easy to understand.
3. Automatic reset, no need to reset manually, the operation is more convenient and simple.
4. A great household necessity to protect your families safety. Perfect for using in home kitchen, bathroom, bus carriage, grill house and so on.
5. Compact size, light weight, easy to carry and operate.
Specification:
[...]
0.1mm Nickel Steel Nickel Plated Strip Tape Battery Spot Welding Tape 1KG 6mm
Features:
1. Nickel strip is commonly used in battery building due to its ease of use in spot welding and soldering as well its high corrosion resistance over time.
2. Steel nickel plating material with good gloss, low resistance and corrosion resistance.
3. Good weldability, high draw tension, easy to operate, enabling your job easier.
4. Good properties and electrical conductivity on the tin.
5. Mainly used in the manufacture of mobile power, charging treasure, nickel-metal [...]
2KW 3KW Massage Bathtub Heater SPA Thermostat Circulating Heating for Hot and Cold Tubs Bathtub SPA Water Heater Equipment
2KW 3KW Massage Bathtub Heater SPA Thermostat Circulating Heating for Hot and Cold Tubs Bathtub SPA Water Heater Equipment
Feature:
1. Widely used in the circulation system of hot springs and hot tubs with pressure to keep and heat the water temperature.
2. Cold water can also be heated, mainly for heating and thermostatic functions, install heater in the position of the bottom level.
3. This thermostat has the characteristics of excellent performance, complete functions, practicality and easy operation.
4. The water heater will start to [...]
1000W Flameless Electromagnetic Mini Induction Heater With 10 Pieces Coil Kits For Auto Use Bolt Remover
Input Voltage V 220/110V 50/60HZ 1000 W 4.5/9.0 A 18V/50A
Reliable Technology and High Quality Components
The accessories coil
Using manual+ Carry Case+ Coils inductor as following sizes Dia 30mm Coil 2 pieces Dia 40mm Coil 2 pieces Dia 50mm Coil 2 pieces 2 pieces 2 pieces
South of Korea, Poland, Unitd States, Canada, Moscow of Russia
overseas warehouse provide. offer maybe different, you can buy from local warehouse for shorter time.
If you need urgently shipping from South of Korea. you can place order though this [...]
AC 220V Aluminum LED Remover PTC Heating Plate Soldering Chip Remove Weld BGA Solder Ball Station Split Plate.
100 brand new and high quality. Features: Automatic constant temperature. High performance and high power. Can also be used for BGA solder ball.
Can be used to disassemble the LED light bead and FPC board.
PTC heating plate and heat dissipating aluminum sheet construction.
30 seconds will be reach about 260 degree celsius ±10 degree celsius. Fine workmanship and good performance. Long service life. Specification: Color: silver Material: aluminum 2 Sizes A: 7cm/2.76 × 6.8cm/2.68 B: 7cm/2.76 × 12cm/4.72 Power: A200W, B400W Voltage: 220V Temperature: 260 degrees Quantity: 1set Note: Transition: 1cm=10mm=0.39inch
Please allow 0-1cm error due to manual measurement. [...]
Extruder Hotend Kit Aluminum Alloy Plug and Play for CR10 for Ender 3 V2 3 Pro 3S 3D Printer
Extruder Hotend Kit Aluminum Alloy Plug and Play for CR10 for Ender 3 V2 3 Pro 3S 3D Printer
Feature:
1. Scope of Application: This hotend extruder kit is a replacement for Ender 3, for Ender 3 V2, for Ender 3 Pro, for Ender 3S, plug and play.
2. Easy Replacement: The heating tube and temperature thermistor drawn from the control box are connected to the junction box and pins. Then you can plug in this hotend kit, which also makes it easier for you to replace the hotend kit.
3. Silicone Pad: [...]
DC5-12.0V Input Voltage ZVS Induction Heating Board 120W Large Power Flyback Heating Driver DIY Cooker and Ignition Coil
This product is a non-tapped mini ZVS finished-board, induction heating, excluding cooling fan. The maximum power is 120W 12.0V induction heating. Push the transformer 12.0V, the primary 10 turns, about 30W. DC5V-12.0V input voltage, this voltage-ranges is working voltage, not the no load voltage of power supplys. The voltage exceeds 12.0V or below 5V, we do not guarantee that it can work normally. Equipped with blue LED indicator light, if the indicator light is weak, means the power supplys is insufficient and you need to replace it with a higher power supplys. Features:
This is a non-tapped mini [...]
1000W Flameless Heating Magnetic Induction Heater Kit with 8 Coils Electromagnetic Induction HeaterNuts Gears Bearings 110V 220V
Features :
【Magnetic Induction Heating】: With the application of magnetic induction technology, there is no open fire, and other parts will not be damaged in the heating process, so it has excellent Design】: The LED light on the top of the product allows you to operate normally in the dark, and the anti-skid grip makes you operate more And Convenience】: It is unwise to use open fire to heat the nut, which not only can not achieve the effect, but also is very dangerous. This machine has no open fire in the work, and is heated evenly [...]
ZVS 1000W 20A Heater DIY Heating Module Induction Board Unit Low Voltage For Flyback Driver Power With Coil Woodworking Electric
Description: 1. Made of 1.6MM double-sided fiberglass board. 2. Using factory-designed large inductors, the parameters are consistent and the performance is more stable. 3. All resistors use five-ring tight resistors five-ring resistors have small error and work more stable. 4. The current at the bottom of the board is mostly filled with tin can be used for induction heating. 5. Generally, it is powered by 12-30V DC power supply. The current needs to be more than 10A. Because the driver board is working in Zero Voltage Switching, his efficiency is the highest. Specifications: Name: Induction [...]
1800W 2500W ZVS Induction Heater Induction Heating Machine PCB Board Module Flyback Driver Heater Cooling Fan Interface+ Coil
Item Name: 1800W or 2500W High Power ZVS Induction Heating Board Module Flyback Driver Heater+Tesla Coil+Dual fan Model:A52357 Product Description Material: metal + plastic Color: Black Input voltage: 12V-48 recommended above 36V
Power requirements: less than 12V ≥ 10A 15V or more ≥ 20A Maximum power: 2500W Maximum current: 50A
Size: 25x12x9cm Manual measurement, error about 3mm, please understand Features:
●The heating plate is made of military-grade PCB, and the performance is stable;
●The power line is fully covered with copper cover [...]
Wyprzedaż i tanie rzeczy do 50, 60, 70, 80, 90, 100 zł. Bezpieczne płatności i łatwe zwroty. Sklep online - znajdziesz tu atrakcyjne produkty, upominki, prezenty, drobiazgi, gadżety, akcesoria.
Reviews
There are no reviews yet.