42.65 $
401 in stock
| Fan Speed Control | No RPM |
|---|---|
| Fan Life | 50000 hrs |
| Power | 0.9W |
| Package | Yes |
| Fan Size | N / A |
| Noise | 0dB |
| Compatible CPU | all |
| Heatsink Material | Aluminum |
| Model Number | 11 - 001 - 255 |
| Lines | None |
| Application | Processor |
| Brand Name | En - Labs |
| Certification | NONE |
| Origin | Mainland China |
| Type | Aluminum Heatsink |
| Fit | Raspberry Pi Radiator |
Features:
These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc.
Installation Instructions:
-Make sure the chip modules are free from dirt and grease.
-Peel the protective liner off on the base of the heatsink.
-Apply the heatsinks to the corresponding chip modules and apply firm pressure.
One Set Package Includes:
1 Piece – 14mm x 14mm x 6mm aluminum heat sink
2 pieces – 8.8mm x 8.8mm x 5mm aluminum heat sinks The price is for 2 sets, total 6 pieces
Features High quality 80mm Hydro Bearing black material fan structure. Low speed to ensure quiet operation Noise lower to 20.3dBA, fan power by 12VDC, connectors Molex IDE 4pin Specifications: 120mm fan size : 80 x 80 x 25mm computer case Bearing Type : Hydro Bearing Rated Voltage/Current : 12VDC/0.08A Power Input :0.96W Speed : 1800RPM+/-10 Max. Air Flow : 21.8CFM Noise : 20.3dBA+/-10 quiet for cooling Connector : Molex IDE 4pin External [...]
41.16 $ Add to cartFeatures: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. [...]
42.65 $ Add to cart
Feature Telecom Phone Cable Cat5 RJ11 RJ45 Network Punch Down Impact Network Tool Wire Cut Tool Insertion This is a punchdown tool for putting wires into sockets, patch panels or outlets. And blades precisely insert and trim wire. It is the only tool you need to add, change or remove wires from connections. Brand new and high quality Durable punch down tool, makes network installation easy A specially-designed wire hook removes terminated conductors A blade helps to easily remove the blocks from back mount frames Universal scissors cut a variety of cable types, including 20 AWG to 26 AWG, and [...]
43.68 $ Add to cart
USB2.0 HUB Quick Charge 3 Ports USB Splitter Mobile Phone Tablet Keyboard Mice Chargers Wall Adapter with LED Indicator Feature: Strong compatibility. Suitable for smart phones, numeric keyboards, hard keyboards, card readers, USB mini fans, USB radiators, keyboards, mice, printers and other computer equipment. 3 in 1 port and super compatible. Expansion 3 USB ports provide current for each port, no driver required, plug and play With LED indicator display, safe and efficient. Indicator light shows, USB extender. Specification: Product Type: USB HUB Product color: Gold, Silver, Black optional Pin specifications: USB interface input Output interface: 3USB interface [...]
40.65 $ Add to cart
1765 Features: 1. Equipped with 15 LED light strips, bringing magical and cool effects. 2. Unique wind-guiding grooves and three-dimensional convex point fan blades provide more powerful air volume. 3. The central axises adopts streamlined shape, which has better heat dissipation effect. Description: The cooling fan uses hydraulic bearings to provide a longer service life, a quieter use environment, a more flexible interfaces configuration, and a black fiber tube to wrap the wire. Specifications: Product size: 120X120X25mn Bearing type: hydraulic Rated voltage: 12V DC Fan speed: 1100RPM±10 Noise value: 23.5DBA Air volume: 36.0CFN Average lifespan: 20000 hours Package [...]
40.80 $ Add to cart
7mm to 9.5mm Adapter/Spacer for 2.5in Solid State Drive SSD Laptop Hard Drive Spacer.The spacers do have the peel-and-stick adhesive. Used to fill the extra space when a 7mm drive is installed into a 9.5mm slot to prevent the drive from rattling in the slot, with two adhesive strips that stick to the drive. Weight: Approx 6g;Material: Plastic; Size: Approx 9.7cm x 6.7cm / 3.82 x 2.64; Compatible With: 2.5in Solid State Drive SSD Laptop Hard Drive Spacer; Package included: 1 x Adapter Note: Due to the difference between different monitors, the picture may [...]
42.06 $ Add to cart
Description:1.There are no scratches while using the pencil tips replacement. The fine rubber nib glides smoothly, smoothly and without scratches, which greatly reduces friction on the screen.2.The smart pencil nib can provide you with an accurate writing/drawing experience with its excellent responsiveness and sensitivity. You can Devices, such as: Note20/10 stylus Spen set refill Tab S6/S7 electromagnetic pen. Note: Pen is not included.4.You will get 5 nibs, this high-quality nib can be easily installed without any tools, just remove it with your hands.5.The quality of our products is guaranteed, and we will follow the principle of being responsible to [...]
40.84 $ Add to cart
About DDR3 Laptop Memory Tips: A. ....For Intel mean can compatible with all the motherboard. B. ....For AMD mean can't compatible with for Intel motherboard. for AMD platform dedicated memory. Socket AM3 motherboard is determined and Socket AM3 + CPU socket can be compatible. can't compatible with A55, A75, A85, FM1, FM2/FM2+ series motherboard. If you can't confirm that you can use for AMD memory, It is recommended that you purchase for Intel memory. CAS Latency: 1333MHz=CL9 1600MHz=CL11 Pins:DDR3=204pin Voltage:DDR3=1.5V/ DDR3L=1.35V Function:Non-ECC Warranty:lifetime warranty Notice: Please select the right memory according to the parameters of your laptop. We have [...]
48.24 $ Add to cart
Model Number: Computer AccessoriesInterface Type: DDR4Material: Electronics + MetalFeature 1: Laptop RAM AdapterFeature 2: DDR4 Card Transfer AdapterType: Add On Cards,PCI To USB 2.0 Card,PCI To 1394 Card,PCI-E To USB 3.0 Card,PCI-E 4X To 16X Card,PCI-E 1X To 16X Card,PCI-E To M.2 Card,PCI Raid Card,PCI-E Raid Card,Diagnostic Card,PCI-E Graphic Card To Exteranl Card,PCI-E To USB 3.1 Card,MINI PCI-E To PCI-ECard,M.2 SSD To PCI-ESupports 2133Mhz Frequency SO DDR4 Memory.4-Layered PCB Design.Compliant with JEDEC Protection Design.PCB dimension: bluePackage Contents: 1 x Adapter Card Only the above package content, other products are not included.Note: Light shooting and different displays may [...]
51.68 $ Add to cart
91201 91200 12mm x 4m Dymo Letra Tag Label Tape 12267 18771 91202 91203 91204 91205 Compatible for DYMO Plastic Label Printer Funciona genial y 100 cintas de etiquetas compatibles nuevas garantizadas de los principales proveedores chinos compatibles con DYMO LetraTag LT-100H, LT-100T, LT-110T, QX 50, XR, XM, 2000, además de instalar igual que la Original. Detalles del producto: Artículo: cinta de etiquetasModelo: cintas de etiquetas LTMaterial:PET y ABSColor: colores mezcladosTamaño: 12mm 0,47 pulgadas x 4M 13 piesModelo: Para Dymo LetraTag LT-100H, LT-100T, LT-110T, QX 50, XR, XM, 2000, Plus LT-100H Calidad del producto: • Fuerte adhesión, [...]
42.16 $ Add to cart
About this item Omega S Embossing Label Machine - Simple turn and click labeling system without batteries and ink. Useful Label Maker Embossing Dials -The dial is designed with useful symbols that are more suitable for everyday use! To make letter selection easier, the label embosser dial turns neither too tight nor too loose. 4 small arrows help you align the upper and lower dials. Ergonomic Handle Makes Pressing Easier - The embossed label maker machine has a flat wide handle for better grip. Embossing becomes easier for adults and kids. Gives a Fast Clean Cuts - Sharp blade [...]
42.25 $ Add to cart
15 Colors 6/9/12mm D1 Tape 40913 43613 45013 for Dymo D1 Tapes Label Ribbon Compatible Dymo LabelManager LM160 LM280 Label Printer Product for Dymo Label MakerModel:40910 40913 40916 40917 40618 40919Color:Black on 6mm 9mm 12mmLength: 7mFeature:Water Resistant, Abrasion Resistant, Corrosion-Resistant, Temperature Resistance,Fade Resistant, Chemical for Printer:for Dymo COLORPOP Label Maker,for Dymo LabelManager 100 120P 150 160 200 210D 220P 260P 280 300 350 350D 360D 400 420P 450 450D 500TS,for Dymo LabelManager PC PC2 PNPfor Dymo LabelManager Wireless PnPfor Dymo LabelPoint 100 150 200 250 300 350for Dymo LabelWriter 450 Duofor Dymo LabelWriter 450 Turbofor Dymo 1978243 [...]
42.50 $ Add to cart
| Chcę coś kupić ale szukam informacji jak zamówić... |
| Kupiłem coś ale chcę poznać status zamówienia... |
| Odebrałem paczkę ale mam pytanie lub problem... |
| Chcę dokonać zwrotu i potrzebuję informacji... |
| Droptech Sp. z o.o. droptech.polska@gmail.com |
| ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
| NIP: 7712911090 REGON 386758083 |
| Wysyłka bezpośrednio od producenta lub dostawcy |
| DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
| CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.