Item Name: 1800W or 2500W High Power ZVS Induction Heating Board Module Flyback Driver Heater+Tesla Coil+Dual fan
Model:A52357 Product Description Material: metal + plastic Color: Black Input voltage: 12V-48 recommended above 36V
Power requirements: less than 12V ≥ 10A 15V or more ≥ 20A Maximum power: 2500W Maximum current: 50A
Size: 25x12x9cm Manual measurement, error about 3mm, please understand Features:
●The heating plate is made of military-grade PCB, and the performance is stable;
●The power line is fully covered with copper cover design, which can increase the current and heat generation;
●Using oversized and large power heat sink to dissipate heat better;
●The output terminal uses three M4 copper columns in parallel, which can be connected to other outputs such as high voltage package;
●Using six IRFP260 and 12 capacitors in parallel resonance, the power is high and the efficiency is high; Buyers must see / pay special attention Note:
The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. The buyer can prepare water cooling system separately, can buy a small water pump and 2 meters of inner diameter Of 4mm rubber hose.
2. You must pay attention to when using switch power supply, because the high-power switching power supply usually have soft start function, the same output voltage is slowly rising, and if the voltage rise to 10V before By lacking voltage lead to circuit can't afford to vibrate, so that the two MOS tube conduction and burned components at the same time, so be sure to switch the power supply voltage stability and then access the induction heating circuit.
3. When heating the metal objects do not to heat too large metal, otherwise it may be overloaded with power, please add a 35A fuse or ammeter and air switch will be better. package does not inclues
4. Although this drive plate can withstand more than 40A current, but it is recommended that not exceed 48V 35A to prevent accidents and damage.
5. Package comes with heating circle diameter is 60 mm, design voltage is 36V, if you use more than 40 voltage power supply shall be used for inner diameter 70 mm above diameter heating ring, water pump use 12V dc power supply, please use separate Power supply voltage regulator module to burn out fan and water pump.
6. The minimum input voltage of the module is 12V, it doesn't mean all the 12V power supply can be used, some novice buyers may use a smaller power supply. This module has specific voltage and current requirements, the voltage 12V current must Be more than 10A power supply can be used, if the power is too low will lead to the power output is greatly reduced, when the voltage is lower than 12V, it will lead to two MOS at the same time conduction, will burn MOS tube
7. If you find that the MOS tube fever, then the first thing to consider whether the power output meets the requirements.
8. Do not empty the board, otherwise it will issue a very high frequency of noise, and then MOS tube will burn out.
9. Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small heating almost no response, and 12V power supply easily lead to the power supply output voltage decreases, below 12V is very dangerous
10. Induction heating power is great, so fever is normal, be sure to do a good job of cooling.Induction heating, the power recommended more than 48V 50A switching power supply. More than 24V power supply, then more than 20A power supply, the greater the voltage, the greater the current, the greater the heating power, heating faster.
Application: high frequency induction heating plate How to use? Instructions
For induction heating, it is recommended to use a switching power supply of 48V50A or higher. If the power supply is 24V or more, a power supply of 20A or more is required. The higher the voltage, the larger the current, the higher the heating power, the faster the heating speed. Package include: ● 1 x PCB board with dual fans ● 1 x copper tube
Reviews
There are no reviews yet.
Be the first to review “1800W 2500W ZVS Induction Heater Induction Heating Machine PCB Board Module Flyback Driver Heater Cooling Fan Interface+ Coil” Cancel reply
220v 150w/200w/350w Igniter Hot Rod Convenient Stainless Steel Single Head Heating Tube for Traeger Wood Pellet Grills
Features：
brand new and high qualityFast heat, easy to replace, to prevent leakage.Stainless steel, anti-rust, anti-corrosion, high insulation, high safety performance.We offer 3 kinds you can choose one or more according to your needs.Igniter Hot Rod only, other accessories in pictures are not included. Specifications:
Material: Stainless Steel150W Size: approx 6x100mm/0.24x3.94 inches 200W Size: approx 8x100mm/0.31x3.94 inches 300W Size: approx 10x100mm/0.39x3.94 inches Package Includes: 1x Igniter Hot Rod Note:
1.Please allow 1-3cm errors due to manual measurement, make sure that you do not mind before you order.
2.Due to the difference between different monitors, the picture may not [...]
300W 500W 1000W Red Light Therapy Devices Panel for Body Fat Loss 660nm＆850nm Near Infrared Lamp for Skin Care Pain Relief
300W/ 500W/ 1000W LED REDTHERAPY LIGHT PANEL
The 300W/ 500W/ 1000W LED Red Therapy Light panel are ideal for full body skin and tissue therapy, which make with 60/100/200pcs by 5W High Power LED Chips, 60 or 90 degree lens with high penetrate. Also these panels with pure Red 660nm, pure IR 850nm, and popular design Red 660nm mix IR 850nm all three options, customers who can select the one as what you need.The 300W with 2 switches on / off, Red light on, Near-infrared light on, or both Red and NIR light on. The 500W and 1000W with timer [...]
AC220V 300W PTC Air Heater Insulated Ceramic Thermostatic Heater With Fan For Air Conditioner/Vehicle/Humidifier/Electric Heater
220V 300W PTC Heater with Fan Electric Ceramic Thermostatic PTC Air Heater Heating Heater
Feature:
1. No flame, no redness, no toxic or harmful smell. Some products contain over‑temperature protection for overall surface electrical insulation.
2. Can heat solid and gas, meeting your different heating demands, reliable in use.
3. Using ceramic constant temperature heating technology, continuous heat output, automatic constant temperature work.
4. After electrification, the electric energy is converted into heat energy within 0.1s and transmitted to the surface of the aluminum shell within 10S.
5. Continuously [...]
1000W Flameless Heating Magnetic Induction Heater Kit with 8 Coils Electromagnetic Induction HeaterNuts Gears Bearings 110V 220V
Features :
【Magnetic Induction Heating】: With the application of magnetic induction technology, there is no open fire, and other parts will not be damaged in the heating process, so it has excellent Design】: The LED light on the top of the product allows you to operate normally in the dark, and the anti-skid grip makes you operate more And Convenience】: It is unwise to use open fire to heat the nut, which not only can not achieve the effect, but also is very dangerous. This machine has no open fire in the work, and is heated evenly [...]
1000W ZVS Induction Heating Board Module Low Voltage Heater Coil Flyback Driver Heater with Copper Tube for DIY Parts Hardening
Features:
ZVS induction heating board kit can be used by DIY players for hardening, annealing and other heat treatments of small parts.It can be used with graphite crucible not included to smelt gold, silver, copper, aluminum and other metals, heating quickly and evenly.High-quality PCB board heating module, with nice durability, stable performance, wear-resistant and circuit adopts 24-36V low-voltage direct current power supplys, maximum current 20A, maximum power 1000W.The higher the voltage, the greater the heating current, the effect is better and the heat is greater, choose the right voltage according to the actual situation.Induction heating, high power, with [...]
Wyprzedaż i tanie rzeczy do 50, 60, 70, 80, 90, 100 zł. Bezpieczne płatności i łatwe zwroty. Sklep online - znajdziesz tu atrakcyjne produkty, upominki, prezenty, drobiazgi, gadżety, akcesoria.
Reviews
There are no reviews yet.